CW Industrial Cable Gland
CMP CW type brass indoor and outdoor cable gland for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable outer sheath.
All CMP Cable Glands are EMC Tested.
The cable gland also provides mechanical cable retention and electrical continuity via armour wire termination. An armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.
The CMP CW range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Entry Thread "C" | Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range + | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (NP Brass Metric) | PVC Shroud Ref* | Cable Gland Weight (Kgs) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Max | Max | |||||||
| 20S/16 | M20 | 10.0 | 8.7 | 6.1 | 11.5 | 0.9 | 1.0 | 24.0 | 25.9 | 43.0 | 20S16CW1RA5 | PVC04 | 0.118 |
| 20S | M20 | 10.0 | 11.7 | 9.5 | 15.9 | 0.9 | 1.25 | 24.0 | 25.9 | 43.0 | 20SCW1RA5 | PVC04 | 0.118 |
| 20 | M20 | 10.0 | 14.0 | 12.5 | 20.9 | 0.9 | 1.25 | 30.5 | 32.9 | 50.0 | 20CW1RA5 | PVC06 | 0.159 |
| 25S | M25 | 10.0 | 20.0 | 14.0 | 22.0 | 1.25 | 1.6 | 36.0 | 38.9 | 55.0 | 25SCW1RA5 | PVC09 | 0.228 |
| 25 | M25 | 10.0 | 20.0 | 18.2 | 26.2 | 1.25 | 1.6 | 36.0 | 38.9 | 55.0 | 25CW1RA5 | PVC09 | 0.228 |
| 32 | M32 | 10.0 | 26.3 | 23.7 | 33.9 | 1.6 | 2.0 | 46.0 | 49.7 | 58.0 | 32CW1RA5 | PVC11 | 0.362 |
| 40 | M40 | 15.0 | 32.2 | 27.9 | 40.4 | 1.6 | 2.0 | 55.0 | 59.4 | 55.0 | 40CW1RA5 | PVC15 | 0.520 |
| 50S | M50 | 15.0 | 38.2 | 35.2 | 46.7 | 2.0 | 2.5 | 60.0 | 64.8 | 56.0 | 50SCW1RA5 | PVC18 | 0.579 |
| 50 | M50 | 15.0 | 44.1 | 40.4 | 53.1 | 2.0 | 2.5 | 70.1 | 75.7 | 70.0 | 50CW1RA5 | PVC21 | 0.601 |
| 63S | M63 | 15.0 | 50.0 | 45.6 | 59.4 | 2.0 | 2.5 | 75.0 | 81.0 | 70.0 | 63SCW1RA5 | PVC23 | 1.054 |
| 63 | M63 | 15.0 | 56.0 | 54.6 | 65.9 | 2.0 | 2.5 | 80.0 | 86.4 | 80.0 | 63CW1RA5 | PVC25 | 1.200 |
| 75S | M75 | 15.0 | 62.0 | 59.0 | 72.1 | 2.0 | 2.5 | 90.0 | 97.2 | 81.1 | 75SCW1RA5 | PVC28 | 1.779 |
| 75 | M75 | 15.0 | 68.0 | 66.7 | 78.5 | 2.5 | 3.0 | 100.0 | 108.0 | 96.0 | 75CW1RA5 | PVC30 | 2.370 |
| 90 | M90 | 15.0 | 80.0 | 76.2 | 90.4 | 3.0 | 3.5 | 114.0 | 123.1 | 120.0 | 90CW1RA5 | PVC32 | 3.515 |
| 100 | M100 | 15.0 | 91.0 | 86.1 | 101.5 | 3.15 | 4.0 | 123.0 | 132.8 | 140.0 | 100CW1RA5 | LSF33 | 4.100 |
| 115 | M115 | 15.0 | 98.0 | 101.5 | 110.3 | 3.15 | 4.0 | 133.4 | 144.1 | 160.0 | 115CW1RA5 | LSF34 | 4.600 |
| 130 | M130 | 15.0 | 115.0 | 114.2 | 123.3 | 3.15 | 4.0 | 146.1 | 157.8 | 169.0 | 130CW1RA5 | LSF35 | 5.200 |
| Dimensions are displayed in millimetres unless otherwise stated | |||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.
| Cable Gland Size | Entry Thread "C" | Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range + | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (NP Brass Metric) | PVC Shroud Ref* | Cable Gland Weight (Ozs) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Max | Max | |||||||
| 20S/16 | M20 | 0.394 | 0.343 | 0.240 | 0.453 | 0.035 | 0.039 | 0.945 | 1.020 | 1.693 | 20S16CW1RA5 | PVC04 | 4.16 |
| 20S | M20 | 0.394 | 0.461 | 0.374 | 0.626 | 0.035 | 0.049 | 0.945 | 1.020 | 1.693 | 20SCW1RA5 | PVC04 | 4.16 |
| 20 | M20 | 0.394 | 0.551 | 0.492 | 0.823 | 0.035 | 0.049 | 1.201 | 1.295 | 1.969 | 20CW1RA5 | PVC06 | 5.61 |
| 25S | M25 | 0.394 | 0.787 | 0.551 | 0.866 | 0.049 | 0.063 | 1.417 | 1.531 | 2.165 | 25SCW1RA5 | PVC09 | 8.04 |
| 25 | M25 | 0.394 | 0.787 | 0.717 | 1.031 | 0.049 | 0.063 | 1.417 | 1.531 | 2.165 | 25CW1RA5 | PVC09 | 8.04 |
| 32 | M32 | 0.394 | 1.035 | 0.933 | 1.335 | 0.063 | 0.079 | 1.811 | 1.957 | 2.283 | 32CW1RA5 | PVC11 | 12.77 |
| 40 | M40 | 0.591 | 1.268 | 1.098 | 1.591 | 0.063 | 0.079 | 2.165 | 2.339 | 2.165 | 40CW1RA5 | PVC15 | 18.34 |
| 50S | M50 | 0.591 | 1.504 | 1.386 | 1.839 | 0.079 | 0.098 | 2.362 | 2.551 | 2.205 | 50SCW1RA5 | PVC18 | 20.42 |
| 50 | M50 | 0.591 | 1.736 | 1.591 | 2.091 | 0.079 | 0.098 | 2.760 | 2.980 | 2.756 | 50CW1RA5 | PVC21 | 21.20 |
| 63S | M63 | 0.591 | 1.969 | 1.795 | 2.339 | 0.079 | 0.098 | 2.953 | 3.189 | 2.756 | 63SCW1RA5 | PVC23 | 37.18 |
| 63 | M63 | 0.591 | 2.205 | 2.150 | 2.594 | 0.079 | 0.098 | 3.150 | 3.402 | 3.150 | 63CW1RA5 | PVC25 | 42.33 |
| 75S | M75 | 0.591 | 2.441 | 2.323 | 2.839 | 0.079 | 0.098 | 3.543 | 3.827 | 3.193 | 75SCW1RA5 | PVC28 | 62.75 |
| 75 | M75 | 0.591 | 2.677 | 2.626 | 3.091 | 0.098 | 0.118 | 3.937 | 4.252 | 3.780 | 75CW1RA5 | PVC30 | 83.60 |
| 90 | M90 | 0.591 | 3.150 | 3.000 | 3.559 | 0.118 | 0.138 | 4.488 | 4.846 | 4.724 | 90CW1RA5 | PVC32 | 123.99 |
| 100 | M100 | 0.591 | 3.583 | 3.390 | 3.996 | 0.124 | 0.157 | 4.843 | 5.228 | 5.512 | 100CW1RA5 | LSF33 | 144.62 |
| 115 | M115 | 0.591 | 3.858 | 3.996 | 4.343 | 0.124 | 0.157 | 5.252 | 5.673 | 6.299 | 115CW1RA5 | LSF34 | 162.26 |
| 130 | M130 | 0.591 | 4.528 | 4.496 | 4.854 | 0.124 | 0.157 | 5.752 | 6.213 | 6.654 | 130CW1RA5 | LSF35 | 183.42 |
| Dimensions are displayed in inches unless otherwise stated | |||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.
| TECHNICAL DATA | |||||
|
|
|||||
| GOST R Certificate Number | POCC GB.06.H00187 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| ABS Approval No. | 01-LD234401/1-PDA |
| Lloyds Approval No. | 01/00171 |
| Type | CW |
| Design Specification | BS 6121:Part 1:1989, EN 50262:1999 |
| Continuous Operating Temperature | -60°C to +150°C |
| Ingress Protection Rating | IP66 |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium |
| Seal Material | CMP Formulated Thermoplastic Elastomer |
| Cable Type | Single Wire Armour (SWA) |
| Armour Clamping | Armour Cone & AnyWay Universal Clamping Ring |
| Sealing Technique | Unique CMP "LRS" TM Outer Seal (Load Retention Seal) |
| Sealing Area(s) | Cable Outer Sheath |
| Accessories | Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud |
| Gland Kits Available | Gland kit for use with all types of SWA cable including 2 Brass Glands, 2 Steel Locknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including 32mm. For sizes 40mm and above each kit includes 1 of each component. |
EN 50262 Mechanical Classifications - Retention = Class B, Impact = Level 8
EN 50262 Electrical Classifications - Category A without the use of an Earth Tag and Category B with an Earth Tag.
Additional information
